PULSCO’s Skypark 700 Series hydropneumatic controllers are pre-engineered solutions for either surge or pressure control systems.
The Skypark 700 Series has been designed for easy installation, maintenance, and operation. The control logic was developed based on PULSCO’s expertise and experience in fulfilling customer needs. The controller is fully stand alone but can be easily connected to any SCADA or PLC network regardless of communication protocol. The Skypark 700 Series is ideal for new installations or refurbishments.
Call us 949.261.1717
For any question or concern
Off the shelf models for quick turnaround
Analog input surge suppression
Standard 120v (additional voltages available)
Standard ethernet TCP/IP (additional protocol support available)
Remote session support
Remote monitoring services available
12″ HMI color touch screen
Change set points using keypad entry display
View and download event history
Wall mounted NEMA 4X enclosure.
Indoors or outdoors
Rated for operation from -20 to 120 °F (-28 to 48 °C)
No drilling needed for conduit connections
Small and affordable panel for two-analog and four-digital outputs.
Wall-mount NEMA 4 with 7″ HMI touch screen interface.
Ethernet TCP/IP communication standard with downloadable data log.
The controls maintain water system pressure between a specified range to reduce system pumps cycling.
The controls maintain the volume of air required to mitigate pressure spikes in pipelines caused by sudden pump startup, shutdown, or valve closure.
Either the SCP-740 or the SCP-750 are integrated with complete level control assembly for ease of job site installation.
The add and vent air solenoids, bypass and isolation ball valves, pressure gauge, and all piping and fittings needed for a full and complete level control assembly are pre-piped and wired inside a NEMA 4 outer enclosure.